Approx. Rs 1.98 Lakh / PieceGet Latest PriceProduct BrochureProduct Details:
|Model||GAS TIGHT SUIT|
|Country of Origin||Made in India|
Interceptor® Plus Fully Encapsulating gas tight Type 1a suit
Type 1a gas tight suit with internal BA for protection against hazardous gases & vapours
Style Number: ICP650 (COLOUR : BLUE / GREY / ORANGE – AS PER AVAILABILITY)
Features: Tape sealed seams, Expanded back for SCBA, Encapsulated, 2 exhaust ports with shroud, Attached sock boots with boot flaps, Double storm flap with hook and loop closure, Rear entry, Fully encapsulated rear entry vapor-protective Level A suit, Standard Vision Visor
Sizes: SM - 3XL
Case Size: 1/case
Certification: EN 943-1:2015+A1:2019 (Type 1a)
Hazproof Chemical Resistant Boot
Hazproof certified to NFPA 1991 for chemical and Hazmat clean up, Emergency Response and domestic preparedness.
Certified to NFPA 1991 for chemical and hazmat clean up, emergency response, and domestic preparedness.
Made of special polymer material, this comfortable boot meets the protective footwear chemical permeation requirements of NFPA 1991 Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies.
The Haz Proof boot has also been tested to Military Standard 282 and will provide protection against certain chemical warfare blister and nerve agents.
Injection moulded construction for 100% liquid proof protection.
Larger foot area is engineered to accommodate the extra bulk of an encapsulated suit for comfortable fit.
Smooth exterior surface for easy decontamination.
Steel shank provides firm arch support.
Blown closed cell EVA midsole for all day cushion comfort.
Sure, grip cleated outsole has excellent abrasion and slip resistance.
Bright orange colour for high visibility.
Steel midsole meets and exceeds ASTM F2413 PR
Meets ASTM F2413 M/I/75/C/75 EH, for Steel Toe Impact and Compression, and Electrical Hazard Protection. Boot shall withstand 18,000 volts at 60 HZ for 1minute with no current flow or leakage current in excess of 1.0 milliamperes under dry conditions tested as per lab conditions in Test Method F2413
Approx. Rs 21,200 / PieceGet Latest PriceProduct Details:
|I Deal In||New Only|
Salisbury has gone to great lengths to protect workers from low voltage electrical hazards. Salisbury’s Insulating Aprons are made from a high strength fabric reinforced Type II rubber in unique colors; making it easy to identify and highly visible in the work area. Salisbury’s Type II rubber Insulating Aprons meet ASTM F2320 standards.
The Insulating Apron includes two Nomex® webbed bib straps and two Nomex® waist straps with nonmetallic buckles. All the straps are attached with reinforced stitching and Nomex® thread. The insulating apron has straps that can be buckled around the back and around the neck which gives wearers a comfortable and supportive fit. The straps are adjustable so that one size will fit most wearers. The apron measures 42” from the top of the bib and has a full width of 30” to wrap around the front of most workers. Use these aprons where there is a possibility of accidental contact with energized equipment or lines. These products are not intended for purposeful contact with energized equipment.
Explore More Products
Developed and Managed by IndiaMART InterMESH Limited